Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
An open tool roll with six chisels in the pockets
A tool roll with six chisels in the pockets and one flap closed
A rolled-up tool roll
97K5041 - Lost Art Press Tool Roll
97K5041 - Lost Art Press Tool Roll
An open tool roll with six chisels in the pockets
A tool roll with six chisels in the pockets and one flap closed
A rolled-up tool roll
97K5041 - Lost Art Press Tool Roll
97K5041 - Lost Art Press Tool Roll

Lost Art Press Tool RollMade in U.S.A.

Quantity:

Made from durable 10 oz cotton duck canvas, this tool roll has 18 reinforced pockets (three large and six small on each side) with two protective flaps to secure your tools when the roll is full.

Measuring 12" × 16" lying flat, it holds tools up to about 11" long. Rolls easily, and cinches closed with a cotton webbing strap and two nickel O-rings.

Made in USA.

An open tool roll with six chisels in the pockets

Options:

Variations:

  • 97K5041 - Lost Art Press Tool Roll
    1 - $66.50

Lost Art Press Tool Roll

Made from durable 10 oz cotton duck canvas, this tool roll has 18 reinforced pockets (three large and six small on each side) with two protective flaps to secure your tools when the roll is full.

Measuring 12" × 16" lying flat, it holds tools up to about 11" long. Rolls easily, and cinches closed with a cotton webbing strap and two nickel O-rings.

Made in USA.

Related Products

A woodworker uses a 3/4" Narex Richter chisel to trim the tails of a large dovetail joint
A woodworker uses a 1/8" Narex Richter chisel to trim a tenon
A woodworker uses a 3/8" Narex Richter chisel to smooth the walls of a mortise
A woodworker drives a 1 1/2" Narex Richter chisel with a wooden mallet to trim the bottom of a large dado
10S1129 - Set of 8 Narex Richter Chisels (1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2")
10S1129 - Set of 8 Narex Richter Chisels (1/8", 1/4", 3/8", 1/2", 3/4", 1", 1 1/4", 1 1/2")
10S1116 - Narex Richter Chisel, 1"
10S1118 - Narex Richter Chisel, 1 1/4"
10S1124 - Narex Richter Chisel, 1 1/2"
10S1102 - Narex Richter Chisel, 1/8"
10S1104 - Narex Richter Chisel, 1/4"
10S1106 - Narex Richter Chisel, 3/8"
10S1108 - Narex Richter Chisel, 1/2"
10S1112 - Narex Richter Chisel, 3/4"
10S1125 - Set of 4 Narex Richter Chisels (1/4", 1/2", 3/4", 1")
Narex Richter Chisels
Product Information
05S2150 - Veritas PM-V11 Bench Chisels, set of 5 (1/4", 3/8", 1/2", 3/4", 1")
05S2102 - Veritas PM-V11 Bench Chisel, 1/8"
05S2103 - Veritas PM-V11 Bench Chisel, 3/16"
05S2104 - Veritas PM-V11 Bench Chisel, 1/4"
05S2106 - Veritas PM-V11 Bench Chisel, 3/8"
05S2108 - Veritas PM-V11 Bench Chisel, 1/2"
05S2112 - Veritas PM-V11 Bench Chisel, 3/4"
05S2116 - Veritas PM-V11 Bench Chisel, 1"
05S2150 - Veritas PM-V11 Bench Chisels, set of 5 (1/4", 3/8", 1/2", 3/4", 1")
05S2170 - Veritas PM-V11 Bench Chisels, set of 7 (all sizes)
Cutting a tenon with a Veritas PM-V11 Bench Chisel
Back view of Veritas PM-V11 Bench Chisel
Cross-section side view of Veritas PM-V11 Bench Chisel
Front view of Veritas PM-V11 Bench Chisel
05S2170 - Veritas PM-V11 Bench Chisels, set of 7 (all sizes)
Veritas PM-V11 Bench Chisels
Product Information
Crucible Dovetail Template
A Crucible 1:4 dovetail template set on a board to mark the sloped cuts of a dovetail joint
A dovetail template sits flush on the edge of a wooden board
Laying out the straight cuts for a dovetail joint with the straight sides of a 1:4 dovetail template
Using a pencil to mark out dovetails using the template
The straight section of a Crucible 1:4 dovetail template set across the end of a board
A dovetail template hangs on a nail on a wall
97K5036 - Crucible 1:4 Dovetail Template
97K5034 - Crucible 1:6 & 1:8 Dovetail Template
Crucible Dovetail Templates
Product Information
Open dividers marking a measurement at the end of a wooden board
97K5026 - Crucible Dividers
97K5026 - Crucible Dividers
A screwdriver tightens and locks the dividers
Closed dividers on a workbench
Crucible Dividers
Product Information