Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
Grinding a gouge using a Norton 3X grinding wheel
08M2201 - Norton 3X Grinding Wheel, 46x, 6" x 3/4"
08M2202 - Norton 3X Grinding Wheel, 46x, 6" x 1"
08M2301 - Norton 3X Grinding Wheel, 80x, 6" x 3/4"
08M2302 - Norton 3X Grinding Wheel, 80x, 6" x 1"
08M2303 - Norton 3X Grinding Wheel, 80x, 8" x 1"
Grinding a gouge using a Norton 3X grinding wheel
08M2201 - Norton 3X Grinding Wheel, 46x, 6" x 3/4"
08M2202 - Norton 3X Grinding Wheel, 46x, 6" x 1"
08M2301 - Norton 3X Grinding Wheel, 80x, 6" x 3/4"
08M2302 - Norton 3X Grinding Wheel, 80x, 6" x 1"
08M2303 - Norton 3X Grinding Wheel, 80x, 8" x 1"

Norton 3X Grinding Wheels

Quantity:

These are designed for tough grinding jobs, such as reshaping turning tools, grinding hard alloys, heavy material removal in tool-making and restoration, or sharpening small or rounded tools that could hollow softer wheels.

They have a hard grade-K bond, yet run cooler than standard wheels because the ceramic alumina abrasive micro-fractures to expose fresh cutting edges, reducing friction. The wheels do not wear quickly, so require truing less often.

Two grits are available: 46x for heavy stock removal and a general-purpose 80x. The 6" and 8" wheels have 1" arbor holes; the 6" has four bushings (for 1/2", 5/8", 3/4", and 7/8" shafts); the 8" has three bushings (for 5/8", 3/4", and 7/8" shafts). Maximum rpm is 5410 for the 6" wheels and 3600 for the 8".

Note: The 8" wheel should be used only on grinders that are designed for 8" wheels, with no modification to the grinder.

Grinding a gouge using a Norton 3X grinding wheel

Options:

Diameter,Width,Grit

Variations:

  • 08M2201 - Norton 3X Grinding Wheel, 46x, 6" x 3/4"
    1 - $50.50
  • 08M2202 - Norton 3X Grinding Wheel, 46x, 6" x 1"
    1 - $65.00
  • 08M2301 - Norton 3X Grinding Wheel, 80x, 6" x 3/4"
    1 - $74.50
  • 08M2302 - Norton 3X Grinding Wheel, 80x, 6" x 1"
    1 - $97.50
  • 08M2303 - Norton 3X Grinding Wheel, 80x, 8" x 1"
    1 - $114.00

Norton 3X Grinding Wheels

These are designed for tough grinding jobs, such as reshaping turning tools, grinding hard alloys, heavy material removal in tool-making and restoration, or sharpening small or rounded tools that could hollow softer wheels.

They have a hard grade-K bond, yet run cooler than standard wheels because the ceramic alumina abrasive micro-fractures to expose fresh cutting edges, reducing friction. The wheels do not wear quickly, so require truing less often.

Two grits are available: 46x for heavy stock removal and a general-purpose 80x. The 6" and 8" wheels have 1" arbor holes; the 6" has four bushings (for 1/2", 5/8", 3/4", and 7/8" shafts); the 8" has three bushings (for 5/8", 3/4", and 7/8" shafts). Maximum rpm is 5410 for the 6" wheels and 3600 for the 8".

Note: The 8" wheel should be used only on grinders that are designed for 8" wheels, with no modification to the grinder.

Related Products

Grinding a chisel on the low-speed grinder
03J7440 - Rikon 8" Low-Speed Grinder
Attaching a hose to the dust port
Close-up of spark shield magnifying a chisel edge
Using the LED lamp while grinding a chisel
Rikon 8" Low-Speed Grinder
Product Information