Quantity:
Still made the same way as they were in 1819, these traditional square-cut steel brads are produced by Tremont, the oldest nail manufacturer in the United States. Besides being historically accurate for reproduction work and period restoration, they are superior to conventional wire brads in two ways.
First, they are near constant thickness but taper in width. When the parallel sides of the brad are aligned with the grain, the square tip shears fibers, which are then bent downwards and compressed as the brad is driven. The fibers then act like a featherboard on a table saw, preventing the brad from withdrawing. Second, because the square tip shears the fibers, there is no wedging action across the grain; this lets you nail near the end of a board with no splitting.
These round-head brads are popular for cabinetmaking. They are 1" and come in a 1/2 lb box (approximate brad count of 200).
Made in USA.
Options:
Variations:
Round-Head Square-Cut Brads
Still made the same way as they were in 1819, these traditional square-cut steel brads are produced by Tremont, the oldest nail manufacturer in the United States. Besides being historically accurate for reproduction work and period restoration, they are superior to conventional wire brads in two ways.
First, they are near constant thickness but taper in width. When the parallel sides of the brad are aligned with the grain, the square tip shears fibers, which are then bent downwards and compressed as the brad is driven. The fibers then act like a featherboard on a table saw, preventing the brad from withdrawing. Second, because the square tip shears the fibers, there is no wedging action across the grain; this lets you nail near the end of a board with no splitting.
These round-head brads are popular for cabinetmaking. They are 1" and come in a 1/2 lb box (approximate brad count of 200).
Made in USA.
