Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
Using the MagFence to square a small log that is registered against a 3" sacrificial wear face
Making the last cut to square a small log, using the 3" sacrificial wear face mounted to a MagFence
Making the last cut to square a small log, using the 3" sacrificial wear face mounted to a MagFence
86N5053 - 3" Sacrificial Wear Face for Magfence II
Using the MagFence to square a small log that is registered against a 3" sacrificial wear face
Making the last cut to square a small log, using the 3" sacrificial wear face mounted to a MagFence
Making the last cut to square a small log, using the 3" sacrificial wear face mounted to a MagFence
86N5053 - 3" Sacrificial Wear Face for Magfence II

3" Sacrificial Wear Face for Magfence II

Quantity:

Bandsaw Blades
Shop Our Complete Line of Bandsaw Blades

Designed for use with the Magfence II, this sacrificial plastic wear face won’t warp. It bolts directly to your magnetic fence at both ends using the existing channels. Accidental contact with a blade will not damage the blade or the fence.

A 5" tall sacrificial face is also available for resaw work.

Using the MagFence to square a small log that is registered against a 3" sacrificial wear face

Options:

Variations:

  • 86N5053 - 3" Sacrificial Wear Face for Magfence II
    1 - $26.95

3" Sacrificial Wear Face for Magfence II

Designed for use with the Magfence II, this sacrificial plastic wear face won’t warp. It bolts directly to your magnetic fence at both ends using the existing channels. Accidental contact with a blade will not damage the blade or the fence.

A 5" tall sacrificial face is also available for resaw work.

Related Products

A F.A.S.T. fence magnetic block attached to a bandsaw blade
A F.A.S.T. fence magnetic block attached to a bandsaw blade
A F.A.S.T. fence magnetic block attached to a bandsaw blade, with a magnetic fence to the left of it, ready for alignment
86N5050 - F.A.S.T. Fence Alignment System Tool
F.A.S.T. Fence Alignment System Tool
Product Information
A MagFence II attached to a bandsaw table to the left of the blade, viewed from the rear of the fence
A switchable magnet being used to attach a MagFence II
MagFence II attached to a bandsaw table, viewed from the face side of the fence
A piece of wood being resawn, guided by the MagFence II
86N5052 - Magfence II
Magfence II
Product Information
Using a bandsaw and MagFence to resaw a board that is registered against a 5" sacrificial wear face
86N5055 - 5" Sacrificial Wear Face for Magfence II
5" Sacrificial Wear Face for Magfence II
Product Information