Quantity:
Available in 15mm and 18mm lengths, these inserts have 5/16-18 internal threads. Triple start threads mean these inserts stay aligned when driven and provide a faster feed rate.
Typical pre-drill is 12mm to 12.5mm (about 31/64"). Insert collar is 14mm, giving an overlap of about 1mm around the drilled hole for a good seal and clean appearance.
Zinc-plated steel. Driven with a 6mm hex driver. Priced per insert.
Made in Germany.
Options:
Length
Variations:
Rampa SKD330 5/16-18 Inserts
Available in 15mm and 18mm lengths, these inserts have 5/16-18 internal threads. Triple start threads mean these inserts stay aligned when driven and provide a faster feed rate.
Typical pre-drill is 12mm to 12.5mm (about 31/64"). Insert collar is 14mm, giving an overlap of about 1mm around the drilled hole for a good seal and clean appearance.
Zinc-plated steel. Driven with a 6mm hex driver. Priced per insert.
Made in Germany.
