Accessibility Statement

Different Types of Japanese Saws


Japanese saws first became widely available in the West in the 1970s and 1980s, and were quickly adopted by many Western woodworkers because of their quick cutting speed and the fineness of their kerf.


Three different styles of Japanese saws, kataba, ryoba, and dozuki, sitting on a workbench.

Overview of Common Japanese Saws


All Japanese saws cut on the pull stroke. The types of saws vary in the presence of a back, the number of teeth and their functions. Here is a summary of their characteristics to help you choose the right saw for the task.


Type Feature Common # of Teeth Use
Kataba Backless 8-12 tpi on a rip edge; rip teeth are often graduated. 15-20 tpi on a crosscut. Dimensioning stock. Select a tooth style based on direction of cut.
Ryoba Teeth on both sides 9-14 tpi on the rip edge; rip teeth are often graduated. 15-20 tpi on the crosscut. Dimensioning stock or cutting large joinery. Select which edge to used based on the direction of cut.
Dozuki Rigid back 18-25 tpi Fine precision cuts either across or with the grain.

Image left: Japanese-style ripping teeth. Image right: Traditional Japanese crosscut teeth.


The images above show traditional Japanese-style ripping teeth on the left and crosscutting teeth on the right. There are, of course, other variations, such as a ripping tooth with a tiny bevel at the tip, or an “Ikeda” style crosscut tooth, with a more pronounced tip bevel. The former is found on our rip-pattern dozukis, while the latter is seen on some crosscut versions.

Once you’ve selected a saw suited to the task, it’s time to move on to the actual cutting, which is the topic of our next tutorial.

Discover More About Japanese Saws

Japanese Saws: Part Two

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Cutting With a Japanese Saw

Related Products

Marking a dovetail joint using a Veritas 1

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Dovetail Saddle Markers

From: $17.90

Using the Veritas Micro-Adjust Wheel Marking Gauge to measure tenon shoulder and mortise depth

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Micro-Adjust Wheel Marking Gau...

$65.50

05N7001 - Veritas Dual Marking Gauge

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Veritas Dual Marking Gauge

From: $69.50

Scribing dovetails using the Japanese spear-point marking knife

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Japanese Spear-Point Marking Knife

$28.90

Using a Japanese dovetail chisel to chop out the waste between the pins of a dovetail joint

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Japanese Dovetail Chisels

From: $72.50

60S0651 - Bevel-Edge Chisel Set of 5

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Japanese Bevel-Edge Chisels

From: $38.50

Four Miniature Brass Bar Clamps clamping a small box

This image has not been loaded. To print the images, close the print view and scroll to the bottom of the article. Once all of the images have loaded, select the print option again.

Miniature Brass Bar Clamps

From: $8.90