Skip to contentAccessibility Statement
ITEM ADDED TO YOUR CART ()
logologoCart
Search
Cart
A drill bit held in the drill grinding guide being sharpened on the side of a grinding stone
93K7001 - Drill Grinding Guide
A drill bit held in the drill grinding guide being sharpened on the side of a grinding stone
93K7001 - Drill Grinding Guide

Drill Grinding Guide

Quantity:

This bench-mounted drill grinding guide is used with an electric bench grinder.

Twist drills (1/8" to 3/4" dia.) can be sharpened on the side of the grinding stone. It will grind all angles, providing edge relief as it grinds on an arc.

Complete instructions are included.

A drill bit held in the drill grinding guide being sharpened on the side of a grinding stone

Options:

Variations:

  • 93K7001 - Drill Grinding Guide
    1 - $20.50

Drill Grinding Guide

This bench-mounted drill grinding guide is used with an electric bench grinder.

Twist drills (1/8" to 3/4" dia.) can be sharpened on the side of the grinding stone. It will grind all angles, providing edge relief as it grinds on an arc.

Complete instructions are included.

Related Products

Holding a drill bit against the drill stop gauge while tightening the drill stop hex key
05N7701 - Veritas Drill Stop Gauge
Veritas Drill Stop Gauge
Product Information
Set in a square-edge jig, a plane blade is sharpened on a Tormek T-8 sharpening machine
68M0108 - Tormek T-8 Sharpening System
Tormek T-8 Sharpening Machine
Product Information
05J6820 - Veritas Large Drill-Press Table & Fence Set
A Veritas large drill-press table and fence mounted on a drill press
Attaching the included mounting plate used to install the Veritas large drill-press table
Securing the table top to the mounting plate
Setting the removable wooden insert into the table top to support through-drilling
Using built-in levelling screws to set the wooden insert flush with the drill-press table surface
A workpiece secured with a hold-down clamp set in one of the 3/4" dog holes in the drill-press table
Sub-fences on the Veritas large drill-press table opened to allow off-edge drilling
A Veritas 1 1/2" flip stop mounted in the T-track on the drill-press table’s fence
05J6820 - Veritas Large Drill-Press Table & Fence Set
Veritas Large Drill-Press Table & Fence
Product Information
68M0104 - Tormek T-4 Sharpening System
Tormek T-4 Sharpening Machine
Product Information