Options:
Length
Variations:
-
00N1013 -
13mm Flanged Nut, 1/4-20 Quick-Connect
1 - $0.48
10 - $0.38
100 - $0.32
500 - $0.28 -
00N1020 -
20mm Flanged Nut, 1/4-20 Quick-Connect
1 - $0.65
10 - $0.52
100 - $0.45
500 - $0.39 -
00N1025 -
25mm Flanged Nut, 1/4-20 Quick-Connect
1 - $0.72
10 - $0.58
100 - $0.49
500 - $0.43
1/4-20 Quick-Connect Flanged Insert Nuts
With no shoulder, these nuts can be bottomed out in a hole, or set below a surface. The tapered interrupted thread design ensures positive locking and good pull-out resistance. They can also be used for curved work, or when you want to set the nut deep to accommodate over-long bolts.
This style has a thin flange and is used for a flush fit — the flange prevents oversinking.
Die-cast from a zinc alloy. Require a 6mm hex key. Pre-drill size will vary from 8.7mm to 9.5mm, depending on the nut size and the material thickness and density.
Specifications
Measurements for 13mm Nuts
L: 13mm
L1: 3.4mm
D1: 12.5mm
D2: 11.7mm
D3: 7.8mm
Measurements for 20mm Nuts
L: 20mm
L1: 3.4mm
D1: 12.5mm
D2: 12mm
D3: 7.5mm
Measurements for 25mm Nuts
L: 25mm
L1: 4mm
D1: 12.5mm
D2: 11.9mm
D3: 8mm