Options:
Length
Variations:
-
00N1113 -
13mm Plain Nut, 1/4 20 Quick-Connect
1 - $0.48
10 - $0.38
100 - $0.32
500 - $0.28 -
00N1120 -
20mm Plain Nut, 1/4 20 Quick-Connect
1 - $0.60
10 - $0.48
100 - $0.42
500 - $0.36
1/4-20 Quick-Connect Plain Insert Nuts
With no shoulder, these nuts can be bottomed out in a hole, or set below a surface. The tapered interrupted thread design ensures positive locking and good pull-out resistance.
Can also be used for curved work, or when you want to set the nut deep to accommodate over-long bolts.
Insert nuts are die-cast from a zinc alloy, and require a 6mm hex key. As with any fastener, pre-drill size will vary from 8.7mm to 9.1mm, depending on the material thickness and density.
Specifications
Measurements for 13mm Plain Insert Nuts
L: 13mm
L1: 3mm
d2: 12mm
d3: 7.5mm
Measurements for 20mm Plain Insert Nuts
L: 20mm
L1: 3.7mm
d2: 11.7mm
d3: 7.7mm